Skip to main content

    Licensed & Insured(404) 889-3995

    All Articles

    Cost Guides

    Commercial Tenant Improvement Costs in Georgia (2026)

    Real 2026 per square foot costs for commercial tenant improvements in Georgia, with office, retail, and restaurant build out ranges.

    July 6, 2026 8 min read
    Commercial interior renovation

    If you are planning a tenant improvement in Georgia, the first question is usually about cost per square foot. The answer depends on the existing shell, the use type, and the market, but owners still need real numbers to budget a lease, pitch a lender, or compare spaces.

    Here are the 2026 commercial tenant improvement cost ranges we see on office, retail, and restaurant build outs in Canton, Cherokee County, and across North Metro Atlanta.

    Quick reference: 2026 TI costs per square foot

    These ranges assume a build out into a vanilla or second generation shell in Georgia. Numbers are based on projects we have priced or completed in Cherokee, Forsyth, Fulton, and Cobb counties.

    • Office, light refresh: $40 to $80 per sq ft
    • Office, full build out: $80 to $180 per sq ft
    • Retail, basic fit out: $60 to $120 per sq ft
    • Retail, flagship or branded finish: $120 to $220 per sq ft
    • Restaurant, fast casual: $250 to $400 per sq ft
    • Restaurant, full service: $300 to $550 per sq ft
    • Medical and dental office: $300 to $475 per sq ft

    A second generation space that already has usable HVAC, plumbing, and electrical can drop these numbers by 20 to 40 percent. A true white box or vanilla shell usually lands near the middle of each range.

    What the numbers look like by sector

    Office tenant improvements

    Office build outs are the most predictable category. Most of the cost goes to framing, drywall, ACT ceilings, lighting, flooring, paint, and MEP distribution.

    A typical 5,000 sq ft office TI in Alpharetta or Woodstock lands between $400,000 and $900,000 depending on the finish level. Private offices, conference rooms, and open benching all carry similar framing costs, but the finishes and AV coordination decide the final number.

    Retail tenant improvements

    Retail is more finish sensitive than office. A nail salon or small boutique can open for $60 to $100 per sq ft. A national brand with custom fixtures, specialty lighting, and polished floors can push $150 to $220 per sq ft.

    For a 3,000 sq ft retail suite in Canton or Marietta, expect $180,000 to $660,000 total. Storefront and signage are usually outside the base build out number and should be budgeted separately.

    Restaurant tenant improvements

    Restaurant build outs are the most expensive TI category per square foot. Kitchen hoods, grease traps, make up air, three phase power, and health department compliance drive the price.

    In North Metro Atlanta, a 2,500 sq ft fast casual restaurant typically runs $625,000 to $1,000,000. A full service restaurant at 4,000 sq ft can run $1.2M to $2.2M before FF and E. These numbers are the reason landlords often offer larger TI allowances for restaurants, and why pre lease pricing is critical.

    What actually moves the price

    Existing shell condition

    A second generation restaurant with a usable hood and grease trap can save $100,000 or more. An office space with low ceilings and outdated HVAC will cost more than a fresh vanilla shell.

    Use type and MEP load

    Office spaces need basic power and HVAC. Restaurants need gas, grease, exhaust, and heavy electrical. Medical needs plumbing, ventilation, and shielding. The MEP scope often drives the final cost more than the finishes do.

    Finish level

    Polished concrete and open ceilings save money. Custom millwork, specialty tile, high end lighting, and feature ceilings add cost quickly. The same 2,000 sq ft retail space can swing $50 per sq ft based on finishes alone.

    Jurisdiction and permitting

    Cherokee County, City of Canton, City of Woodstock, City of Alpharetta, and Fulton County each have different permit fees, review timelines, and inspection requirements. A complicated plan review can add weeks of carrying cost.

    Landlord work letter

    What the landlord delivers versus what the tenant builds matters. A landlord who provides HVAC, restrooms, and a capped electrical panel lowers the tenant cost. A landlord who delivers nothing but drywall and a slab pushes the full cost to the tenant.

    Hidden costs to budget separately

    • Architectural and engineering drawings: typically $4 to $10 per sq ft
    • Permit and impact fees: $2,000 to $15,000 depending on jurisdiction and size
    • FF and E: furniture, fixtures, and equipment are not in the construction budget
    • Signage and exterior branding: often $10,000 to $75,000
    • Security, AV, and low voltage: budget separately unless included in the lease
    • Soft costs and contingency: 10 to 15 percent of hard cost is a safe buffer
    • Carrying cost during permitting: rent and loan interest while you wait for approvals

    How to get a real budget before you sign a lease

    Square foot ranges are useful, but a real budget is specific to a space. Before you sign, bring a general contractor in for a walk through. Here is what we need to give you a reliable number:

    1. Address and square footage of the suite
    2. Use type and concept layout
    3. Existing shell condition, including HVAC, plumbing, and electrical capacity
    4. Landlord work letter or tenant criteria
    5. Target open or move in date

    We can usually return a budget range and a realistic schedule within a few days.

    How to use the TI allowance

    Most commercial leases in Georgia include a tenant improvement allowance, but the allowance rarely covers the full build out. For office and retail, the gap is often small. For restaurant and medical, the gap can be large.

    The key is knowing the gap before you sign. That gives you leverage to negotiate a higher allowance, a longer free rent period, or landlord delivered work on big ticket items like HVAC and electrical.

    Why owners hire Nobo for TI work

    Nobo Construction is a family owned commercial general contractor based in Canton, Georgia. We help tenants and owners budget, build, and open commercial spaces across Cherokee County and North Metro Atlanta. Licensed and insured, real budgets, real schedules, real coordination with landlords and brokers.

    If you are comparing spaces or negotiating a lease, talk to us before you sign. We respond within 24 hours.

    #tenant improvement costs#commercial build out#Georgia#Canton GA#cost guide